1. Introduction
7
6. Update
The Update function is used to connect the scan
tool to the update website server and update the
software if necessary.
When you click on Update from the Home Screen
(Figure 1.8 on page 4), the Update screen appears,
as shown below.
Figure 1.16: Update Screen
7. Setup/Help Functions
When you click on Setup/Help from the Home
Screen (Figure 1.8 on page 4), the Setup/Help
screen appears, as shown below:
Figure 1.17: Setup/Help Screen
This screen contains options for viewing
information about the scan tool and adjusting
default settings for the scan tool as follows:
Wi-Fi - sets up the Wi-Fi network.
Network - sets up the Ethernet network.
Unit - sets the unit of measure.
Date/Time - sets the date and time.
Language - sets the default language for the
scan tool software.
Backlight - adjusts the backlight of the
screen.
Beep - sets the beep of the scan tool.
Touch - calibrates the touch screen.
Remote Desk - sets the remote desk.
About - provides information about the scan
tool, such as software version, operating
system software version, hardware version,
product serial No., etc.
For more information, refer to Chapter V System
Setup on page 33.
