Configuring SDSL Frame Alarm Profiles
116 Avidia System Configuration and Management User Manual
The following screen shows an example of both show alarm commands.
Deleting SDSL Frame Alarm Profiles
1 From the ::alarm=> prompt, type show then press to display the configured
SDSL frame alarm profiles.
2 Note the index number of the profile you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The index number of the alarm profile you want to delete.
Example
::alarm=> delete 3
You cannot delete profiles that are assigned to ports.
::alarm=> show 1
Index LOSW Mgn Mgn_Mode ES ES_Mode UAS UAS_Mode
1 enable 6 enable 17 enable 60 enable
::alarm=> show
Index LOSW Mgn Mgn_Mode ES ES_Mode UAS UAS_Mode
1 enable 6 enable 17 enable 60 enable
2 disable 6 enable 17 disable 60 enable
ENTER
ENTER
