Tektronix WFM 601A Wheelchair User Manual


 
Configuration Commands
WFM 601A, WFM 601E & WFM 601M User Manual
C–15
Table C–3: UIMENU: commands and options
:<command> <options> Remarks
STICKY FILTer | CURsor | LINESe-
lect | GAIN | CONFIG
Sets the selection to the named subsystem
when in the UIMENU mode. The Sticky
function is accessible from the front panel
by pressing a menu button before pressing
the CONFIG button.
PREset ON | OFF Enables or disables UIMENU presets. Use
the PRESET commands to recall, store,
and name presets.
CONFIG ON | OFF Selects the CONFIG menu for display. Use
the CONFIGSEL command to select a
particular display or mode to configure.
CONFIGFCT ON | OFF Turns on or off the USER INTERFACE
MENU (also accessible from the bezel
knob).
CONFIGSEL WFMVEC | EY | JIT |
SERIALARM | GAM | CAL
Selects a category in the CONFIG menu.
This selection is equivalent to turning the
bezel knob in the CONFIG menu. Use the
CONFIG command to enable the CONFIG
menu.
CRTADJUST READ | TRACE |DISPLAY Enables the CRT adjustments on the
current display, if allowed.
uimenu:preset off
uimenu:config on
uimenu:configsel wfmvec
uimenu:configfct on
uimenu?
:UIMENU:STICKY FILTER;PRESET OFF;CONFIG ON;CONFIGFCT
ON;CONFIGSEL WFMVEC;CRTADJUST TRACE
uimenu:preset?
:UIMENU:PRESET OFF
Examples
Returns