Filter
Top Products
43
930336 Rev. E
X. OPERATING GUIDE
C. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit.
This protects the controller from damage
due to overheating. In extreme conditions
(such as repetitive hill climbing) the circuit
will decrease the power to your motors.
This allows the chair to operate at a
reduced speed.When the controller cools,
the chair will return to normal speed.
D. CIRCUIT BREAKERS
1. Notes:
Your Quickie P200 has two battery boxes,
with a circuit breaker on each box.
• In the unlikely event of a short circuit
or heavy overload, all power to your
chair will be shut off.
• To reset your chair, depress the circuit
breaker button(s) on the front of the
battery boxes.A few minutes wait is
required before the circuit breaker(s)
will reset.
2. Repeated Shutdown:
If the chair continues to shut down
after resetting, have it serviced by
a supplier.
42
930336 Rev. E
X. OPERATING GUIDE
B. QTRONIX PROGRAMMING PAD (OPTIONAL)
Program settings beyond the ability of the rider can result in serious injury. Consult
your health care advisor before you alter settings.
1. Notes:
The QTRONIX Programmer lets you
adjust the control settings of the
P200.You can customize a program for
yourself or select the standard program.
• acceleration rate
• deceleration rate
• turn acceleration
• turn deceleration
• forward speed (max & min)
• reverse speed (max & min)
• turn speed (max & min)
• steer correct
• 4-axis joystick throw
• sleep timer
• read timer
2. To Program Your Chair:
a. Turn off power to the chair.
b. Insert QTRONIX Programmer plug (A)
into the Programmer/Charger socket on
the front of the joystick.
c. Turn on power to the chair; program
as needed.
d. Remove plug and cycle ON/OFF
switch to drive chair.
Note: Review the QTRONIX Programmer
Owner’s Manual for more details on how to
program your chair.
Note: Program settings that are not matched
for the capabilities of the rider can result in
serious injury. Do not alter settings without the
advice of your health care professional.
A