Filter
Top Products
41
930336 Rev. E
X. OPERATING GUIDE
A. PERFORMANCE CONTROL SETTINGS
1. It is vital to match control settings to your level of function and ability.
2. Consult your health care professional and your supplier to select the best
control settings for you.
3. Check and adjust the settings every six to twelve months (or more often, if needed).
4. Adjust the control settings immediately if you notice any change in
your ability to:
• Control the joystick.
• Hold your torso erect.
• Avoid running into objects.
5. Control Settings are adjusted through the use of the Quickie QTRONIX
Programmer. See your supplier if you do not own a Quickie QTRONIX
Programmer pad.
40
930336 Rev. E
IX. SET-UP, ADJUSTMENT & USE
F. REAR AXLE
The rear axle sockets on your Quickie
P320 manual wheelchair can be installed
in one of two positions.The rear position
offers more stability against tipping back-
wards.The front position offers improved
maneuverability.
As a general guideline: if your backrest is
adjusted forward, place the axle sockets in the
front position. If your backrest is set rearward,
place the axle sockets in the rear position.
G. CHECK-OUT
Once the wheelchair is assembled and
adjusted, it should roll smoothly and
easily.All accessories should also
perform smoothly.
After the wheelchair has been set up be
sure the chair performs to your specified
operational settings (see pages 38-43). If the
chair does not perform to specifications, turn
the wheelchair OFF immediately and repro-
gram operational specifications.
Repeat this procedure until the
wheelchair performs to specifications
before attempting active use of the
wheelchair.
If you have any problems, follow these
procedures:
1. Review the set-up and check-out
section and operating guide to make
sure chair was properly prepared.
2. If your problem persists, contact
your authorized supplier.
If you still have a problem after
contacting your authorized supplier,
contact Sunrise customer service.
See the introduction page for details
on how to contact your authorized
supplier or Sunrise customer service.