Filter
Top Products
16
Installation
For the HDLA1500, proceed to step 2.
For the HDLA1505, proceed to step 3.
2
Pull the viewfinder table lock lever 1 toward the rear
panel, then pull the release knob 2 and slide the
viewfinder table in the direction of the arrow 3.
3
Push the rear panel lock release lever on the left panel
down to open the rear panel.
4
Remove the viewfinder from the camera (if attached).
5
Mount the camera.
For the HDLA1500/1505
1 Remove the lens (lens cap) from the camera and
push the lens mount lever fully downward.
2 Check that the cover of the SHUTTER switch of
the camera is closed.
3 Fix the viewfinder base of the camera in the
position closest to the handle.
4 Place the camera inside and slide it forward until it
locks in place.
5 Press the camera lock lever on the front panel fully
downward to secure the camera in place.
Camera lock
lever
[1500][1505]
2
3
1
[1500][1507]
1
2
(The figure shows HDLA1500.)
3
Viewfinder base
1
Lens mount lever
2
SHUTTER switch
[1500][1505](The figure shows HDLA1500.)