Filter
Top Products
10
Locations and Functions of Parts
a Tally lamp [1500][1505]
The lamp lights when a red tally signal is supplied to the
mounted camera.
To display the camera number, attach the supplied number
plate for up tally or select the desired number on the menu
of the camera.
b Camera handle catch [1500][1505]
To hold the camera handle when the viewfinder is to be
shifted toward the front.
For details, see “To adjust the viewfinder position” on
page 19.
c Holder for camera number plate
Attach a number plate for side panel (supplied) to display
the camera number.
For details, see “Attaching the Number Plates” on page
21.
d Cable clamp
Used to secure the camera cable.
e DC OUT connector (round 4-pin)
To supply power (12 V, max. 1.5 A
1)
) to the script light of
the BKP-7911 Script Holder.
1) Limited depending on the conditions, such as the cable length between the
camera and CCU, and the type of CCU, viewfinder or lens used in
combination.
f Accessory bracket
Used to secure optional accessories such as the BKP-7911
Script Holder.
For more information on attaching an accessory, see the
accessory’s operation manual.
g DC OUT connector (XLR 4-pin)
To supply general-purpose power (12 V, max. 5 A
1)
).
1) Limited depending on the conditions, such as the cable length between the
camera and CCU, and the type of CCU, viewfinder or lens used in
combination.
Viewfinder table (page 18)
Viewfinder table lock lever
(opposite side)
Viewfinder table release
knob
Rear panel lock release
lever
cHolder for camera
number plate
dCable clamp
fAccessory bracket
HDLA1507
eDC OUT connector
gDC OUT connector