Soehnle 7710 Microscope & Magnifier User Manual


 
English
4488
Weighing with a fixed tare value memory
Known bed weights can be stored as the tare value in a no-volt protected memory and called up as
required (400 different bed weights are possible).
Each memory location has a:
• three-digit consecutive number
• description (plaintext, 18 characters)
• tare value
Inputting tare weights into the fixed tare value memory
• Press the Print key and function key "F" simultaneously to go to setting mode.
• The arrow points to "Program Settings". Confirm with the Print key.
• Confirm the display "General" with the Print key.
• Scroll to "Fixed tare value" using the Tare key and accept with the Print key.
• If no tare memory has yet been assigned, the first free, or otherwise the last selected fixed tare value
memory is displayed.
• Press the ORG key and then the Print key: the input box for describing a new tare memory is
displayed.
• Input the description with the alphanumeric keypad and confirm with the Print key.
• The arrow points to "Tare value" .
• Press the Print key: the input box for the tare value is displayed.
• Input the tare value and confirm with the Print key.
• Return to tare memory selection with the Zeroing key.
• If further tare memories are to be assigned, select the next free memory location by pressing the
ORG key and repeat the procedure described above.
• To return to weighing mode, press the Zeroing key and then the ORG key.
Changing or overwriting a fixed tare value memory
• Press the Print key and the F key simultaneously; setting mode appears in the display.
• The arrow points to "Program Settings". Confirm with the Print key.
• The arrow points to "General". Confirm with the Print key.
• Scroll to "Fixed tare value" using the Tare key and accept with the Print key.
• The last selected fixed tare value memory is displayed.
• Select the tare memory you wish to change using the F key or the Tare key, or input the memory
location number and confirm with the Print key.
• Press the Print key: the input box for describing the tare memory is displayed.
• Change the description with the alphanumeric keypad and confirm with the Print key.
• The arrow points to "Tare value" .
• Press the Print key: the input box for the tare value is displayed.
• Change the tare value using the numeric keypad and confirm with the Print key.
• Return to tare memory selection with the Zeroing key.
• If you wish to change more tare memories, use the F key or Tare key to select the next memory
location you wish to change and repeat the procedure described above.
• To return to weighing mode, press the Zeroing key and then the ORG key.