Filter
Top Products
Terminal settings
In "Terminal" setting mode you will find the following request and setting options.
Version
AZG software version Display only
AZG applications software Display only
AZG serial number Display only
CPU board serial number Display only
Display
Backlight luminosity setting Input in percent via the numerical keypad
0% is dark, 100% is full luminosity.
Factory setting: 80%
Contrast Contrast setting, input in percent via the numerical keypad
1% is lowest contrast, 100% is full contrast.
Factory setting: 50%
Language Language:
German/English/French
Decimal separator Comma, point or none
Factory setting: comma
Thousand separator Comma, point or none
Factory setting: comma
Keypad
Keypad keylock Individual, several or all keys on the keypad can be
locked. By pressing the key that is to be locked, the status
of the key can be changed from open to locked and vice versa.
To accept, press the Print key for 3 seconds.
Key tone selection "Off" or "on". Confirmation tone when a key is pressed.
Factory setting: "off"
Acknowledgement tone selection "off" or "on"
Acknowledgement tone when a function has been executed.
Factory setting: "off"
Date/time
Time Input via the numerical keypad. Press Print key to start clock count
down
Date Input via the numerical keypad
Date format Selection European or imperial date
Factory setting: European
English
3377