Filter
Top Products
8
The Wireless External Alarm can be programmed to react 2 arming sequences
when it receives the signal from the sensor. In order to arm the Wireless External
Alarm, the remote (optional) must be programmed to the Wireless External Alarm.
You may arm the Wireless External Alarm in 2 different sequences:
6A – Arm Home Sequence:
This setting is used when you wish to secure the area but will be at home and
moving around within the armed area. In Arm Home setting, any motion sensor will
not respond to any movement. Alarm will sound instantly if any of the sensors (e.g.
door/window sensor) is activated (except motion sensor).
- Pressing the ARM HOME button on the remote will arm the Wireless
External Alarm in Home mode.
- You will hear 2 beeps and the LEDs will ash twice indicating the Wireless
External Alarm in Home mode.
6B – Arm Away Sequence:
This setting is used when you are the last one to leave the premises. By arming
the Wireless External Alarm in Away mode, you will have 30 seconds to leave the
premises after arming. After 30 seconds, all sensors in the premises are armed.
Activating these sensors in Arm Away mode will result in 30 seconds delay. The
alarm will sound if not disarm during the 30 seconds period.
- Pressing the ARM AWAY button on the remote will arm the Wireless
External Alarm in Away mode.
PrOgrAmmINg – ArmINg sEquENcE
PANIC
ARM
HOME
ARM
AWAY
DISARM