Filter
Top Products
10
The Wireless External Alarm is designed to work with the Skylink security control
panel such as AM-001, ML-001 and SC-001. Put the control panel that you plan to
program into programming mode. Refer to the User’s Instructions of that control
panel.
7A – Learn control panel AM-001 or ML-001 to the Wireless External Alarm:
- Press and hold the Learn button on the Wireless External Alarm for 2 seconds
and then release. The Learn/Set LED will ash.
- Activate the control panel AM-001 or ML-001 by pressing [ARM] and then
enter your current Master PIN (MPIN) [factory default 1 2 3 4].
- You will hear 2 beeps and the LEDs will ash twice indicating the control panel
is now programmed to the Wireless External Alarm.
7B – Learn control panel SC-001 to the Wireless External Alarm:
- Press and hold the Learn button on the Wireless External Alarm for 2 seconds
and then release. The Learn/Set LED will ash.
- Activate the control panel SC-001 by entering your current Master PIN
(MPIN) [factory default 0 0 0], then enter [B], [B].
- You will hear 2 beeps and the LEDs will ash twice indicating the control panel
is now programmed to the Wireless External Alarm.
OPErATINg ThE skyLINk sEcurITy cONTrOL PANEL
Learn/ Set