SkyLink SA-001S Medical Alarms User Manual


 
9
- You will hear 1 beep and the LEDs will ash once indicating the Wireless
External Alarm is being counted to Away mode.
- After 30 seconds, you will hear 2 beeps and the LEDs will ash twice indicating
the Wireless External Alarm in Away mode.
6C – Disarm
- Pressing the DISARM button on the remote will disarm the Wireless External
Alarm instantly.
- You will hear 2 beeps and the LEDs will ash twice indicating the Wireless
External Alarm is disarmed.
6D - Panic
- Pressing the Panic button on the remote will cause siren instantly.
Note:
- During the Arm Away mode, you will have 30 seconds to leave the premises.
This is called the exit delay. When the exit delay expires, the Wireless
External Alarm is armed.
- If a sensor is triggered while the Wireless External Alarm is armed, such as
entering the premises, an entry delay will be triggered. User is allowed to
disarm the Wireless External Alarm during the 30 seconds entry delay. You
will hear beeping every 5 seconds during the entry delay interval. If the
Wireless External Alarm is not disarmed within 30 seconds, alarm will sound
immediately.