Filter
Top Products
4
cAuTION:
The adaptor as a disconnect devices: − the socket-outlet shall be installed near the
equipment and shall be easily accessible.
In order for the remote or sensor or control panel to communicate with the Exter-
nal Wireless Alarm properly, this need be programmed into the Wireless External
Alarm previously. Follow the brief instructions below to program it to the Wireless
External Alarm.
Before proceeding, ensure you have both the Wireless External Alarm and the re-
mote or sensor or control panel next to you.
3A – Learn remote to the Wireless External Alarm:
- Press and hold the Learn button on the Wireless External Alarm for 2
seconds and then release. The Learn/Set LED will ash.
- Activate the remote by pressing any one of the buttons.
- You will hear 2 beeps and the LEDs will ash twice indicating the remote is now
programmed to the Wireless External Alarm.
Insert the rechargeable battery pack
to the black connector marked “NiMH”
Plug in AC adapter
Plug in AC
adapter
PrOgrAmmINg –
LEArN rEmOTE Or sENsOrs Or cONTrOL PANEL