Filter
Top Products
12
You can enable or disable the Alert Notication. When it is set to enable, the
Wireless External Alarm will beep when arm or disarm or during the entry/exit
countdown period. When it is set to disable, the Wireless External Alarm will not
beep when arm or disarm or during the entry/exit countdown period. However, the
LED will remain ashing as it is. The Wireless External Alarm will still siren when
it is triggered.
Unplug all the power (batteries and AC adapter) when setup the Alert Notication.
Factory default is set to “Enable”. To select, you will see a jumper connector marked
“J1” as shown below. Use a paper clip to remove the jumper connector and
re-locate to the proper posts. Apply the power to the Wireless External Alarm again
after setup the Alert Notication
A LErT NOTIFIcATION JumPEr
Alert Notication Jumper (J1)
Mode Jumper (J1) Setting
Enable
Set the connector to top 2
posts (1-2)
Disable
Set the connector to bottom 2
posts (2-3)