Filter
Top Products
15
Questions Solutions
Why the Wireless External
Alarm does not respond to the
sensors or remote?
You must program the sensors or remote
to the Wireless External Alarm before they
can work together.
Why I can’t arm my system? Make sure none of the sensors are trig-
gered. For example, the door/window
sensor should be in close status.
Why isn’t the Wireless External
Alarm beeping yet the lights are
all ashing?
You have set the Alert Notication Jumper
to ‘Disable’, this will disable the beeping.
Reset this jumper to ‘Enable’ will enable
the beeping.
How can I erase just one sen-
sor or remote from the Wireless
External Alarm?
You cannot erase just one sensor or
remote from the unit. You must erase all
sensors or remote and then program the
ones that you want to keep.
Will the Wireless External
Alarm function properly if no
back up batteries are installed?
The Wireless External Alarm will function
properly if there is AC power (model SA-
001A), even without the backup batteries.
The backup batteries provide power when
there is no AC power, e.g. during power
failure.
TrOuBLE shOOTINg