Filter
Top Products
US Jazzy 1113/Rev I/Feb03 www.pridemobility.com 49
X. CARE AND MAINTENANCE
To calibrate the joystick (Remote Plus only):
1. Position the joystick in the full reverse position and hold it there. Turn on the controller.
2. The battery condition meter lights up from one light to ten lights, and then back to one light. It does this twice, then blinks
rapidly.
3. Turn off the controller.
4. Position the joystick in the full forward position and hold it there; then turn the controller on.
5. The battery condition meter lights up from one light to ten lights, and then back to one light. It does this twice, then blinks
once, and then it blinks continuously.
6. Turn off the controller. Now the joystick and controller are set up to function properly together.
MONTHLY CHECKS
n Check that the anti-tip wheels do not rub the ground when you are operating the Jazzy; adjust them as necessary.
See VI. Comfort Adjustments in this manual.
n Check for extreme wear on the anti-tip wheels. Replace them as necessary.
n Check for drive tire wear. See an authorized Pride Mobility Products Corporation provider for repair.
n Check the rear casters for wear. Replace as necessary.
n Check the rear forks for damage or fluttering which indicates that they may need to be adjusted or the bearings
may need to be replaced. See an authorized Pride Mobility Products Corporation provider for repair.
n Keep your Jazzy clean and free of foreign material such as hair, food, drink, etc.
YEARLY CHECKS
Take your Jazzy to an authorized Pride Mobility Products Corporation provider for yearly maintenance. This helps
to ensure that your Jazzy is functioning properly and helps prevent future complications.
Storage
Your power chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the
batteries from the power chair. See IX. Batteries and Charging.
WARNING! If you fail to store the unit properly, the frame can rust and the electronics can
be damaged.
Cleaning Precautions
CAUTION! Never hose off your power chair or place it in direct contact with water. Your
power chair has a painted, ABS plastic body shroud that allows it to be easily wiped clean
with a damp cloth.
CAUTION! Never use any chemicals to clean a vinyl seat, as they may cause the seat to
become slippery or dry out and crack. Use soapy water and dry the seat thoroughly.