Filter
Top Products
US Jazzy 1113/Rev I/Feb03 www.pridemobility.com 35
VIII. OPERATION
REMOTE PLUS CONTROLLER
The Remote Plus is a modular electronic control system. The electronics necessary to operate the power chair are
contained in several modules located on different parts of your power chair.
The Remote Plus system consists of the following components:
n master remote
n communications cable(s)
n power module
n motor wiring harnesses
n battery wiring harnesses
n actuator lighting module
(for optional equipment)
The master remote is located typically on the end
of an armrest. The other components are located
inside the power base.
Remote Plus Master Remote
The Remote Plus master remote consists of the
following (see figure 29):
1. joystick
2. keypad
3. controller communications cable
4. off-board charger/programming socket
Joystick
The joystick controls the direction and speed of your power chair. When you move the joystick from the neutral
(center) position, the electromagnetic brakes release and allow your power chair to move. The further you push the
joystick from its neutral position, the faster your power chair moves. When you release the joystick and allow it to
return to the neutral position, you engage the electromagnetic brakes. This causes your power chair to decelerate
and come to a complete stop.
WARNING! If your power chair begins to move in an unexpected manner, immediately
release the joystick. Unless the joystick is damaged, this action should stop your power
chair.
Keypad
The keypad is located directly in front of the joystick. See figure 30. It contains keys that you will use to control
your power chair.
On/Off Key
The on/off keys toggles the system power on and off.
1
2
3
4
Figure 29. Remote Plus Master Remote