Filter
Top Products
data a
data b
dtamgr Use this mode to
communicate with the Data
Manager
™
by LifeScan.
Continue pressing C to rotate
between the choices.
Press M to save and return to
the beep selection.
If you pressed M when rs-232
appeared:
9600 displays. When using
the RS-232 data management
mode, the meter is set at the
factory for a baud rate of 9600.
Press M to save and continue
or
Press C to choose the correct
baud rate for the data manage-
ment system you are using:
300
1200
2400
Continue pressing C to rotate
between the choices.
Press M to save and return to
the beep selection.
beep displays. You may cycle
through the selections again,
if desired, or press the on/off
button to turn the meter off.
62
M
C
M M M
M M M
LSI-99-221_9/2/99 11/11/99 11:02 AM Page 62