Filter
Top Products
Press forward on the base of
the test strip holder to be sure
it is properly in place.
You are now ready to do a
check strip test. If the check
strip will not slide into the
test strip holder, repeat this
procedure.
Replacing the Battery
The ONE TOUCH
®
II Meter
comes with
a battery
already
installed.
When the
battery
must be replaced, use only a
Duracell
®
brand alkaline
battery (J-size, 6 volts, part
#7K67), commonly available
in drug and hardware stores.
This will ensure that you get
the best performance from
your ONE TOUCH II Meter.
The battery should last
about one year with typical
home use.
When the battery is getting
low, the display will flash.
code 9
code 9
code 9
(example)
The meter will still provide
accurate test results with a
low battery, but you should
replace it as soon as possible.
When
battry
47
6-VOLT
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 47