Filter
Top Products
Rub the test area with a cotton
swab or soft cloth dampened
with water to remove all
blood, dirt, or lint from the
test area. If necessary, a mild
liquid dishwashing detergent
mixed with water may also
be used. Do not apply full-
strength detergent to the test
area. Be careful not to scratch
the test area.
Dry the test area with a soft,
dry tissue or cloth. Remove
any lint.
Step 4: Replace Test
Strip Holder.
Hook the bottom of the test
strip holder onto the square
notch on the meter.
Press down on the raised dots
of the test strip holder until it
snaps firmly into place.
P
A
S
D
'
A
L
C
O
O
L
46
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 46