Filter
Top Products
4. HELP! (Troubleshooting)
The display messages that appear on the
meter will guide you through the glucose
testing and quality control test procedures,
alert you to problems as they occur, and give
you information about test results stored in
the meter memory. This section provides
you with a complete listing of the display
messages, what they mean, and what to do
if there is a problem.
Test Procedure Messages
These messages appear during routine testing.
Just follow them carefully and they will guide
you through the test.
MESSAGE APPEARS WHEN
You press and hold
the on/off button.
It means all display
segments are work-
ing properly.
The meter is first
turned on. This code
number (1–16) must
match the code num-
ber on the test strip
vial or be reset.
code 7
(example)
30
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 30