Filter
Top Products
Part No. 1110547 27 Tracer® EXI
Phillips Screws
Section 5 - Seat and Back includes the following:
Replacing Back Upholstery
Replacing Seat Upholstery
Adjusting Seat Width
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely - otherwise injury or damage
may occur.
REPLACING BACK UPHOLSTERY (FIGURE 1)
1. Remove the eight (8) phillips screws and washers that secure the existing back
upholstery to the back canes.
2. Remove existing back upholstery from the back canes.
3. Securely tighten the new back upholstery to the back canes with the phillips screws
and washers.
FIGURE 1 - REPLACING BACK UPHOLSTERY
Phillips
Screws
Washers
Washers
Back Upholstery
REPLACING SEAT UPHOLSTERY (FIGURE 2)
1. Remove the eight (8) phillips screws and washers that secure the existing seat
upholstery to the crossbraces.
2. Remove the existing seat upholstery from the crossbraces.
3. Ensure positioning of seat positioning strap (if used). Refer to INSTALLING THE
SEAT POSITIONING STRAP in SECTION 10 of this manual.
4. Install new seat upholstery by reversing STEPS 1-2.
FIGURE 2 - REPLACING SEAT UPHOLSTERY
Seat Upholstery
SEAT AND BACK SECTION 5
SEAT AND BACK