Support User Manuals

Invacare Pronto M51 Base Mobility Aid User Manual

Open as PDF

of 72

SECTION 8—TOP SHROUD AND WHEELS

Part No. 1148076 49 Pronto

®

M51

™

Base with SureStep

®

Engaging/Disengaging Motor Release Lever

ƽ WARNING

DO NOT engage or disengage the motor release lever until the On/Off switch on

the joystick is in the Off position.

CAUTION

Ensure both motor release levers are fully engaged before driving the wheelchair

NOTE:Forthisprocedure,refertoFIGURE 8.2.

NOTE:Themotorlockdisengagement/engagementallowsfreewheelingorjoystickcontrolled

operation.Freewheelingallowsanattendanttomaneuverthewheelchairwithoutpower.

1. Locatethemotorreleasehandlesonthemotorsprotrudingthroughthetopshroudon

therearofthewheelchair.

2. Performoneofthefollowing:

•ToDisengagetheMotorReleaseLevers‐Pullthemotorlocklevertowardstherear

ofthewheelchair(freewheelposition).

NOTE:Thisallowsthechairtofreewheelforpushing,ifnecessary.

NOTE:Itmaybenecessarytorockthewheelsslightlyuntilthemotorreleaseleverdisengages.

•ToEngagetheMotorReleaseLevers‐Pushthemotorlockhandlestowardsthe

frontofthewheelchair(driveposition).

NOTE:Thisallowsthemotorstodrivethewheels.

NOTE:Itmaybenecessarytorockthewheelsslightlyuntilthemotorreleaseleverengages.

FIGURE 8.2 Engaging/Disengaging Motor Release Lever

Disengaged

Right Motor

Release Lever

Shown

Engaged

previous next