Invacare Pronto M51 Base Mobility Aid User Manual


  Open as PDF
of 72
 
SECTION 7—FOOTBOARD ASSEMBLY
Pronto
®
M51
™
Base with SureStep
®
46 Part No. 1148076
FIGURE 7.2 Adjusting the Footboard Assembly - Angle
Depth
NOTE:Forthisprocedure,refertoFIGURE 7.3.
1. Removethequickreleasepinthatsecuresthefootboardassemblytothewheelchair
frame.
ƽ WARNING
Make sure the detent balls of the quick-release pin are fully released and beyond the
outer edge of the tube before operating the wheelchair. Otherwise, injury and/or
damage may result.
Keep detent balls clean.
2. Adjustfootboardtooneofthreemountingpositions.
3. Installthequickreleasepin.Makesurethedetentballsofthequick‐releasepinare
fullyreleasedandbeyondtheouteredgeofthetube(Detail“A”).
FIGURE 7.3 Adjusting the Footboard Assembly - Depth
Set Screw, Washer
and Jam Nut
Footboard
Assembly
Bottom View of
Footboard
DETAIL “A” - BOTTOM VIEW OF
FOOTBOARD
Quick
Release Pin
Detent
Ball
Footboard
Assembly
Mounting
Hole
Quick Release Pin
Outer Edge
of Tube
Detent Balls
Three Depth
Adjustment Holes
 previous next