Support User Manuals

Invacare Pronto M51 Base Mobility Aid User Manual

Open as PDF

of 72

SECTION 5—WHEELCHAIR OPERATION

Part No. 1148076 37 Pronto

®

M51

™

Base with SureStep

®

Connected Devices Screen

NOTE:Forthisprocedure,refertoFIGURE 5.8.

ThisscreenisdisplayediftheModeSelectswitchisheldactiveforabout10seconds.This

screenshowsaniconthatrepresentsanyadditionaldevicesthatareconnectedtothe

chair.

FIGURE 5.8 LCD Display Screens - Connected Devices Screen

Programmable Mono Port 1/2 or External Mode Switch

Theprogrammablemonoportorexternalmodeswitchinputislocatedattherearofthe

joystickontheleftside.Theprogrammablemonoportinputoffersthechoiceofthree

options:

•Remotedriveselect

•Remotestop/mode(reset)input

•Singleactuatorinput

Thesingleswitchfunctionsoperatethroughmonoport1.Anoptional

y‐cableallowsa

secondprogrammablefunctionthroughmonoport2.

Remote Stop Switch

Theremotestopswitchisusedtostopthewheelchair.

Remote Mode (Reset) Switch

Theremotemoderesetswitchfunctionsthesamewayasthemodeswitch.RefertoMode

Switchonpage 38.

ICON DESCRIPTION

4-Switch Attendant Control

RIM Control

ECU (1 to 4)

Proportional Attendant Control

Compact Joystick

Sip and Puff Control

ASL Digital Control

ASL Analog Control

Shark Power Module Actuator

previous next