Filter
Top Products
SECTION 6—SEAT
Part No. 1148076 41 Pronto
®
M51
™
Base with SureStep
®
SECTION 6—SEAT
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, verify that ON/OFF
switch on the joystick is in the OFF position.
Tilting the Seat Assembly (Formula CG Only)
ƽ WARNING
Make sure power to the wheelchair is OFF before performing this procedure.
Never leave the seat assembly in the UP/OPEN position unless necessary to
perform a a procedure on the wheelchair - otherwise injury or damage may result.
After ANY adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
NOTE:Forthisprocedure,refertoFIGURE 6.1onpage 42.
NOTE:Removingtheseatisnotnecessarytoaccessthebatterycompartmentonwheelchairs
equippedwithaFormulaCGseatingsystem.Theseatassemblytiltsbackandpropsintoplaceto
provideaccesstothebatteriesandtheundersideoftheseat.
Tilting the Seat Assembly Back
1. Placethewheelchairinawellventilatedareawhereworkcanbeperformedwithout
riskingdamagetocarpetingorfloorcovering.
2. Ensuretheseatingsystemisinthefullyuprightposition.SeeFormulaCGseating
systemmanualshippedwithwheelchair.
3. VerifythejoystickOn/OffswitchisintheOffpositionand
disconnectjoystickcable.
4. Engagethemotorreleaselevers.RefertoEngaging/DisengagingMotorReleaseLever
onpage 80.
5. Removefrontrigging.SeeFormulaCGseatingsystemmanualshippedwith
wheelchair.
6. Removethetwoscrewsandlocknutssecuringtheseatingassemblytothefrontseat
posts.
7. Firmlygraspthefrontedgeoftheseatassembly,slowlytilttheseatassemblybackinto
theUp/Openposition.
8. Removeproprodfromthecliplocatedontheseatingassemblyandengagetheprop
rodendintothefrontseatpostasshowninFIGURE 6.1.