Filter
Top Products
38
Spacer
Spacer
18-INCH FRAME FRONT SEAT-TO-FLOOR HEIGHT
NOTE: The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If wheelchair
is equipped with urethane tires, subtract 1/2-inch from the measurements listed below. All heights are approximate
to
+1/4-inch due to tire wear and air pressure.
* NOTE: Anti-tippers are available in two (2) sizes - “A” and “B”. Note the size shown in the chart below.
22 24 26
ABB
22 24 26
ABB
22 24 26
ABB
22 24 26
ABB
22 24 26
ABB
22 24 26
ABB
PROCEDURE 5 WHEELS
W
H
E
E
L
S
FRONT CASTER AXLE REAR WHEEL SIZE
SEAT-TO-FLOOR SIZE AND TUBE
HEIGHT POSITION POSITION ANTI-TIPPER SIZE* AND POSITION
17-INCHES 3-INCH TOP
UPPER Two (2)
Mounting Holes
17-INCHES 5-INCH TOP
UPPER Two (2)
Mounting Holes
18-INCHES 3-INCH MIDDLE
LOWER Two (2)
Mounting Holes
18-INCHES 5-INCH MIDDLE
LOWER Two (2)
Mounting Holes
18.5-INCHES 6-INCH BOTTOM
LOWER Two (2) Mounting Holes
INVERTED CAMBER CLAMPS
19-INCHES 5-INCH BOTTOM
LOWER Two (2) Mounting Holes
INVERTED CAMBER CLAMPS