Filter
Top Products
SECTION 7—ARMS
Xtra™ 50 Part No 1026793
Adjusting T-Arm Transfer Assists and/or Side Guards
NOTE: For this procedure, refer to FIGURE 7.10.
1. Remove the T-arm from the wheelchair. Refer to Installing/Removing T-Arms on
page 45.
2. Remove the two (2) socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one (1) of the following:
• Small Side Guards - Move the bottom clamp up one (1) of two (2) mounting
positions in the side guard.
• Large Side Guards - Move the bottom clamp up one (1) of three (3) mounting
positions in the side guard.
4. Re-secure the side guard to the bottom clamp with the two (2) socket screws. Torque
to 80-90 in./lbs.
5. Install the T-arm onto the wheelchair. Refer to Installing/Removing T-Arms on
page 45.
FIGURE 7.10 Adjusting T-Arm Transfer Assists and/or Side Guards
Transfer Assist
Slide Guard
T-Arm
Socket
Bottom Clamp