Filter
Top Products
SECTION 4—FRONT RIGGINGS
Part No 1026793 29 Xtra™
FIGURE 4.1 Installing/Removing/Adjusting the Footrests - Swingaway Front Frame
Adjusting 70° MFX and 90° Footrests
NOTE: For this procedure, refer to FIGURE 4.2.
1. Remove any accessories that are attached to the footrests.
2. Remove the socket bolt, coved washer and locknut that secure the footplate to the
footrest support.
3. Reposition the footplate to the desired height.
4. Reinstall the socket bolt through the mounting holes of the footplate and footrest
support.
ࣼ CAUTION
DO NOT overtighten socket bolt and locknut. Footrest must be able to rotate
upward from the horizontal to the vertical position.
5. Secure the footplate to the footrest support with the coved washer and locknut.
FIGURE 4.2 Installing/Removing/Adjusting the Footrests - Adjusting 70° MFX and 90°
Footrests
Footrest Mounting Pin
Footrest Release Lever
Mounting Tube
Installing/Removing
Adjusting
Coved Washer
Hex Screw
Footrest
Locknut
Footplate
Footrest
Support
Height Adjustment
Holes
Socket Bolt