Filter
Top Products
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Part No 1026793 25 Xtra™
Inspect/Adjust Monthly
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Wheel bearings are clean and free of moisture.
❑ Wheel locks do not interfere with tires when rolling.
❑ Wheel lock pivot point are free of wear and looseness.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Ensure all hardware is tight.
❑ Ensure hand grips are not loose.
Inspect/Adjust Periodically
❑ Wheelchair rolls straight (no excessive drag or pull to one side).
❑ Arms are secure but easy to release and adjustment levers engage properly.
❑ Adjustable height arms operate and lock securely.
❑ Armrest pad sits flush against arm tube.
❑ No bent or protruding metal on clothing guards.
❑ All fasteners on clothing guards are secure.
❑ Seat and/or back upholstery have no rips.
❑ Inspect modular seat rail attaching hardware is securely tightened.
❑ Inspect back mounting plate attaching hardware is securely tightened.
❑ Inspect back fold down mechanisms to ensure they securely latch.
❑ No excessive side movement or binding when rear wheels are lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Inspect tires/casters for flat spots and wear.
❑ Check pneumatic tires for proper inflation (recommended tire pressure is listed on the
side wall of the tire).
❑ Wheel lock pivot point are free of wear and looseness.
❑ Clean upholstery and armrests.
❑ Sealed bearings and axle nut tension are correct.
❑ Wheel/fork assembly has proper tension when caster is spun. Caster should come to
a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Wheel bearings are clean and free of moisture.
❑ Wheel locks are easy to engage.