Filter
Top Products
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Xtra 26 Part No 1026793
❑ Clean quick-release axles with a Teflon
®
lubricant.
❑ Ensure axles are free from dirt, lint, etc.
❑ Ensure roller bearings are free from dirt, lint, etc.
❑ Adjust wheel locks as tires wear.
❑ Clean and wax all parts.
Troubleshooting
Maintenance
ƽ WARNING
After adjustments and BEFORE use, make sure all attaching hardware is securely
tightened, otherwise injury or damage may result.
ƽ CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause damage to
the frame tubing.
CHAIR VEERS
LEFT/RIGHT
SLUGGISH
TURN/PERFORMANCE
CASTERS
FLUTTER
SQUEAKS AND
RATTLES
LOOSENESS
IN CHAIR
CHAIR 3 WHEELS
SOLUTIONS
X X X If pneumatic tires, check for correct and equal pressure.
XXXX Check for loose stem nuts/bolts.
X X Check that casters contact ground at the same time.