Filter
Top Products
Airport Systems
PLC Health Monitoring & Reporting Sys 3-18 Manual EPM40002083-001 Rev -
4) Exit
3) Facility Information
2) Report Configuration
1) Light Configuration
HMS Maintenance Menu
25) Exit
3) 1 1 151 SW 1
2) 1 1 152 SE 2
1) 1 1 151 NW 1
Lamp_ID Tier_Lvl Height Facing_Dir Priority
HMS Light Configuration Menu
5) Exit
4) Relays & ETHERNET – Change report method to include both
3) ETHERNET – Change report to ethernet
2) Relays – Change report method to relays
1) NONE – Change report method to none
Current Report Method: Relays + ETHERNET
HMS Report Configuration Menu
9) Exit
8) Latitude
7) Longitude
5) Altitude
4) FCC NUMBER
3) ADDRESS LINE 1
2) CONTACT NUMBER
1) OWNER
HMS Facility Configuration Menu
Press 1
Press 2
Press 25
Press 5
Press 9
Press 3
maint>1
7)Exit
6 Clear All fields
4) Direction: NW
3) Height : 151 Feet AGL
2) Tier Level: 1
1) Lamp ID: 1
HMS Modify Light Menu
Press 1
Press 7
Figure 3.7-2 HMS Maintenance Menu Hierarchy
The following is a detailed set of instructions for navigating and utilizing PLCHMR’s
maintenance menu system.
3.7.2 HMS Maintenance Menu Login
Access to the Maintenance Mode menus is restricted. A login id and password are
used to control access to the Maintenance Mode Menus. To gain access to the
maintenance mode menu use the following steps:
a) Connect one of the PC/Laptop’s serial ports to the PLCHMR’s serial port using a
female/female null modem serial interface cable as shown in Figure 3.7-1 (Radio
Shack Model 03044 Catalog # 55010600 or equivalent). The PLCHMR’s serial
port connection requires a DB-9 female connector.
b) On the PC/Laptop start a terminal emulator. Either HyperTerminal or Tera Term
is a suitable terminal emulator.
c) Configure the PC/Laptop’s terminal emulator’s serial port parameters to:
i) 115200 baud,
ii) 8 data bits,