Filter
Top Products
Deviation Active
This is the run screen that appears during an
active deviation. A and B pressure are shown.
The bar across the bottom indicates the magnitude
of the differential pressure with respect to the
alarm setpoint.Refer to the following table for more
information.
Icon
System Status
Indicate
s that there is an active
deviatio
n.
The yellow light on the light tower will
be flashing.
The air to the motor is on. Once the
deviation condition no longer exists
it automatically generates the Spray
Mode Active Run Screen
Information Screen
The information screen is only available when an
alarm, deviation, or advisory is active. It shows
theactivealarmcodeandtheAandBpressure
conditions at the time of the alarm, if applicable.
If the alarm condition occurs while on the run screen
the information screen is automatically generated.
The red light on the light tower will be solid on. Refer
to the following table for more information
Icon
System Status
Indicates that there is an active
alarm.
The red light on the light tower will be
solid on and the system is disabled.
Indicates that there is an active
deviation.
The yellow light on the light tower will
be flashing.
Indicates that there is an active
advisory.
The yellow light on the light tower will
be solid on.
Active Alarm Code
See
Error Codes, page 13.
26 3A1331C