Filter
Top Products
Groups and Settings
36 EMC Smarts Application Connectivity Monitor Configuration Guide
To open the Polling and Thresholds Console, follow these steps:
1 Attach to the Domain Manager with the Global Console. The Topology
Browser Console opens.
2 In the Topology Browser Console, select Configure > Domain Manager
Administration Console. The Domain Manager Administration Console
Console opens.
3 In the Domain Manager Administration Console, select Edit > Polling
and Thresholds. The Polling and Thresholds Console opens.
Layout of the Polling and Thresholds Console
The Polling and Thresholds Console is divided into two panels.
• The left panel displays the icon for the analysis domain in the upper-left
corner and provides two tabs, Polling and Thresholds, at the bottom.
When the Polling tab is selected, the console displays polling groups.
Likewise, when the Thresholds tab is selected, the console displays
threshold groups.
For each group, there are settings that provide adjustable parameters
and a membership list of managed elements to which the settings are
applied.
• The right panel remains blank until a group, setting, or member is
selected in the left panel. When an item is selected in the left panel, the
right panel displays additional information regarding that item.
Note: Some domain managers only contain polling or threshold groups, but
not both. The Domain Manager will only display the groups that it
contains. For example, if threshold groups are not available to a
Domain Manager, then only polling groups are displayed. A managed
element can be a member of one Polling group and one Threshold
group.
Figure 5 provides an example of a Polling and Thresholds Console.