Filter
Top Products
Groups and Settings
32 EMC Smarts Application Connectivity Monitor Configuration Guide
Threshold Groups
Application Connectivity Monitor provides the following threshold groups:
• Software Service Groups
Software Service Groups
The Software Service Groups applies settings to all elements of the
SoftwareService class except elements of the InChargeService class. Table 5
describes the Software Service Groups included with Application
Connectivity Monitor.
Threshold Settings
Application Connectivity Monitor includes the following threshold settings:
• Software Service Thresholds
For more information about which threshold groups a setting can be applied
to, see Threshold Groups on page 32.
Software Service Thresholds
Software service thresholds provide parameters for software element checks.
The software element checks use two parameters, Check_Sensitivity and
StatisticsWindow, in conjunction with a threshold to determine when an
abnormal condition exists. This design provides two benefits:
• It prevents wide variations between high and low values from skewing
the results, as might be the case if values were averaged.
• It provides more control over the sensitivity of the analysis. When the
value of the sensitivity parameter is 0%, one value over the threshold
triggers the event. If the sensitivity parameter is 100%, every value
within the StatisticsWindow must be over the threshold.
Table 6 describes the parameters of Software Service Thresholds.
Table 5: Properties of the Other Software Service Groups
THRESHOLD
G
ROUP
MATCHING CRITERIA SETTINGS DESCRIPTION
Default Value of CreationClassName is
not InChargeService, but is an
element or subclass of
SoftwareService
Software Service Thresholds Members include elements of
the VirtualSoftwareService
(and its subclasses),
MgmtService, and
MgmtAgent classes.