Filter
Top Products
Deploying Application Connectivity Monitor
10 EMC Smarts Application Connectivity Monitor Configuration Guide
For more information about the Adapter Platform, see the EMC Smarts
Service Assurance Manager Adapter Platform User’s Guide. For more
information about DomainType entries and configuring settings for system
defaults, see the EMC Smarts Service Assurance Manager Configuration
Guide.
ACM Domain Manager
ACM Domain Manager discovers and monitors applications.
• It receives topology from the Standard Probe.
• It receives monitoring results from the Standard tcpAction.
• It receives topology and notifications from Adapter Platform.
The ACM Domain Manager correlates this information and sends the root-
cause and impact analysis as well as topological information to the SAM
Global Manager.
To receive notifications and topology from the Adapter Platform, you must
manually add the element to the ACM Domain Manager’s topology using
the Domain Manager Administration Console.
See Adding Sources to the ACM Domain Manager on page 10 for
instructions.
To transfer events and topology to the Global Manager, no changes are
necessary for the ACM Domain Manager.
Adding Sources to the ACM Domain Manager
To use the Domain Manager Administration Console to add the Adapter
Platform to the ACM Domain Manager’s topology, perform these steps. (If
you already have a console open, make sure you are attached to the ACM
Domain Manager and start with Step 3). The domains must be registered
with the same broker at startup for this process to function properly.
1 Open the Global Console using either the sm_gui command or the
Start menu.
2 Log on and attach to the ACM Domain Manager.
3 From the console, select Configure > Domain Manager Administration
Console.
4 Select Topology > Add Source.