Filter
Top Products
43
TROUBLESHOOTING
PROBLEM EASY SOLUTION
EO is displayed on
LED Screen
a. Check that lid is closed properly
b. Check the pressure release valve is in the
correct position
c. Make sure the silicone rubber gasket is attached
properly to the gasket holder and is securely in place
on the lid
E1 is displayed on
LED Screen
• Unplug unit and allow to sit for 20 minutes. If no
change, Please call Breville Customer Service.
E2 is displayed on
LED Screen
• Ensure Cooking bowl is properly positioned inside
base. The cooking bowl must be in direct contact
with the heating plate. Make sure there are no
unwanted materials on the heating plate.
E3 is displayed on
LED Screen
• Ensure lid is off the appliance or placed on top to
rest in an offset position when you are using the
SAUTÉ/SEAR setting.
The appliance automatically
switches to Keep Warm
without going through a
complete cooking cycle.
• Add more water to cooking bowl and restart the
cooking cycle.
Air is escaping from the rim
of the lid
a. Install sealing gasket correctly
b. Clean sealing gasket
c. Replace sealing gasket
d. Lock lid again
Steam is released from the
float valve
a. Clean sealing gasket
b. Replace sealing gasket
c. Change silicone rubber gasket every 1-2 years.
The float can not rise in
PRESSURE COOK setting
a. Place Pressure release valve in the correct position
b. Place more food and water in the cooking bowl
c. Call Breville Customer Service