Bayer HealthCare Blood Glucose Meter MODEL Ascensia Elite Blood Glucose Meter User Manual


 
27
Things to Remember About the Memory
SECTION 4
Recall Test Results from the Memory (see page 23)
Low (below 20 mg/dL [1.1 mmol/L]) and high (above 600 mg/dL [33.3 mmol/L]) test
results are displayed and stored in memory as Lo and Hı. In calculating the aver-
age, Lo is entered as 20 mg/dL (1.1 mmol/L), and is entered as 600 mg/dL
(33.3 mmol/L).
A C- display preceding a test result display indicates that the test result is a
Control Test result.
Delete Test Results from the Memory (see pages 24 and 25)
The only time you can delete a single test result (i.e., keep it from being stored in
the memory) is at the end of a Control or Blood Glucose Test.
A test result is automatically stored in the memory if it is not deleted at the end
of the test.
If you decide not to delete the test result after beginning the delete process, pull
out the strip while dEL is still displayed.