Arkon PRT03831-xxx Blood Glucose Meter User Manual


  Open as PDF
of 195
 
OVER
Steps Do This
5. Set, review, or change your
Projected Low glucose alarm.
a. Select Projected Low from the Alarms menu.
•UsetheUP/DOWNArrowbuttonstohighlight
Projected Low.
•PresstheRIGHT Option button to select
Projected Low.
b. Review or change your settings.
•PresstheLEFT Option button (Next) to move
from one eld to the next.
•UsetheUP/DOWNArrowbuttonstochange
the setting in any eld.
•PresstheRIGHT Option button (Set) to accept the
settings and return to the Alarms menu.
Note: e receiver will respond with a brief sample
of the alarm you selected.
c. Decide what to do next.
•Youaresetting,reviewing,orchanging
all alarms.
Continue to the next step.
•Youarenishedsetting,reviewing,and
changing alarms.
Go to Step 11.
If en
Decide what settings you want:
• Alarmonoro.
• Sensitivity.
• Alarmtype(Setting).
– Low, medium, or high beep.
– Short, medium, or long
vibration.
If you want this much notice
before reaching your Low
glucose level:
en set the
Sensitivity to:
•Maximumdetection(most
alarms, approximately 30
minutes in advance of events)
•Intermediatedetection
(intermediate alarms,
approximately 20 minutes in
advance of events)
•Lowdetection(fewestalarms,
approximately 10 minutes in
advance of events)
High
Medium
Low
Section 8 73
Set, Review, or Change the Alarm Settings
Alarm Settings 08:30A
Low Glucose (70)
High Glucose (275)
Projected Low (On)
Projected High (O)
Data Loss
Main Select
Alarm Settings 08:30A
Projected Low Glucose
ON
Sensitivity: Low
Setting: Medium Beep
Next Set
 previous next