Filter
Top Products
45
General Information
This chapter provides additional reference information including the characteristics and
signal connections for the FS2343 FBDIMM Interposer Probe. The following operating
characteristics are not specifications, but are typical operating characteristics.
Probe Connection
240 pin gold finger card edge connection at target (bottom) end of probe and card edge
socket at the top edge of the probe both conforming to JEDEC spec MO-224.
Protocol supported
The FS2343 is designed to probe a DDR2 Fully Buffered DIMM system. Contact
FuturePlus Systems for more detailed information.
Logic Analyzer required
169xx or PC running Agilent technologies 1680/90/900 software version 3.00.00
software, using 16753 or better, 1695x or better cards.
Logic Analyzer Adapter Cables required
Service requirements
If a failure is suspected in the FS2343 Probe contact the factory or your FuturePlus
Systems authorized distributor.
The repair strategy for the probe is for the product to be returned to the factory upon
factory approval.
Logic Analyzer
card
Termination
Adapter
Number Required
16760,
16753/4/5/6,
16950
E5378A 6