Filter
Top Products
19
Example using symbol “Activate” in a trigger
Preferences
The Preferences option is used to set the protocol decoder for failover mode. If the
Southbound or Northbound is in failover mode, the preferences must be set accordingly.
If the Northbound side is in failover the user must select which lane has failed in order
for the decoder to decode the bus properly. The default settings for both the
Northbound and Southbound are set to None, meaning they are both running at full
potential. To access the preferences select the Tools menu after a configuration file has
been loaded successfully, then select FBDIMM Protocol Decoder -1/Preferences.
Below is a picture of the screen when selecting preferences.
Another preference option is Raw Mode. When selected the output on the Northbound
and Southbound labels will be shown in a binary format instead of the regular decoded
output. All twelve transfers and all lanes will be shown in each state.