Filter
Top Products
13
FBDIMM Paddle Board Connector layout
Software Requirements
For state analysis you must have version A.02.99.00 or later Agilent OS installed on the
1690x frame. Version A.02.99.00 contains the capability for SMBus control of the probe
through the 16753/4/5/6 or 16950 cards.
Setting up the 169xx Analyzer
A CD containing the 16900 software is included in the FS2343 package. The CD
contains a setup file that will automatically install the configuration files and protocol
decoder onto a PC containing the 16900 operating system or onto a 16900 analyzer
itself.
To install the software simply double click the FBDIMM.exe file on the CD containing the
16900 software. After accepting the license agreement the software should install within
a couple of minutes.
169xx Licensing
Once the software has been successfully installed you must license the software.
Please refer to the entitlement certificate for instructions on licensing the software. The
software can only be installed on one machine. If you need to install the software on
more than one machine you must contact the FuturePlus sales department to purchase
additional licenses.
Loading 169xx configuration files and General Purpose Probe feature
When the software has been licensed you should be ready to load a configuration file.
You can access the configuration files by clicking on the folder that was placed on the
desktop. When you click on the folder it should open up to display all the configuration
files to choose from. If you put your mouse cursor on the name of the file a description
will appear telling you what the setup consists of, once you choose the configuration file
that is appropriate for your configuration the 16900 operating system should execute it.
The protocol decoder automatically loads when the configuration file is loaded. If the
decoder does not load, you may load it by selecting Tools from the menu bar at the top
of the screen and select the decoder from the list.
After loading the configuration file of choice, the user should see both the Probe Control
application icon and the FBDIMM configuration and decoder icon in the Probes column
on the Overview page. Clicking on the Properties button of the FBDIMM Config icon will
display the General Purpose Probe Set as defined for this configuration.