1. Pattern Playback
74 RS7000
A Track Status
Indicate whether the corresponding track contains data, as
well as the mute or solo status of the track.
:The track contains sequence data.
:The track is empty.
:The track is muted (no sound will be produced by this
track).
[S]:The track is soloed (all other tracks are temporarily
muted and only this track will sound).
:Sample data is assigned to this track.
[Mute & Solo Setting Procedure]
1.
To use the mute function first press the [MUTE] button
so that its indicator lights.
To use the solo function press the [MUTE] button while
holding the [SHIFT] button so that the indicator flashes.
2. Press a white key on the keyboard to mute or solo the cor-
responding track.
• Mute
When a white key is pressed to mute a track the corre-
sponding key indicator will flash. Additional white keys
can be pressed to mute multiple tracks.
• Solo
When a white key is pressed to solo a track the corre-
sponding key indicator will flash. When a different white
key is pressed the solo function switches o the new track
(only one track can be soloed at a time).
3. When the [MUTE] button is pressed so that its indicator
goes out the solo function is disengaged and all tracks
will sound. Muted tracks will remain muted.
While the [MUTE] button indicator is either lit or
flashing, the indicators above the keyboard
white keys will be lit, flashing, or off, indicating
the status of the tracks as follows:
Lit ................The corresponding track contains
data.
Flashing ......The corresponding track is muted
or soloed.
Off ...............The corresponding track does
not contain data.
