2
The Pattern Mode
8. Changing the Sound of Voices (Voice Edit)
RS7000 103
1 CUTOFF (Filter Cutoff Frequency) ............[Knob 1]
Relative
[Settings] -64 ~ +63
Sets the filter cutoff frequency. Positive values move the cut-
off toward higher frequencies, while negative values move
the cutoff toward lower frequencies.
The effect of the cutoff frequency will vary according to the
selected filter type.
2
RESONANCE........................................................[Knob 2]
Relative
[Settings] -64 ~ +63
Produces a resonant peak centered at the filter’s cutoff fre-
quency.
When the BPF filter type is selected, higher resonance set-
tings produce a narrower passband at the cutoff frequency.
When the BEF filter type is selected, higher resonance set-
tings produce a narrower elimination band at the cutoff fre-
quency.
3
FILTER TYPE........................................................[Knob 3]
Absolute
[Settings] BYPASS, LPF24, LPF18, LPF12, HPF,
BPF, BEF
BYPASS ...........................The filter is OFF. The filter
type indicators on the panel
will all be off.
Sets the filter type.
LPF24, LPF18, LPF12.....Low-pass filter
Frequencies higher than the cutoff frequency are cut off.
Three cutoff slopes are provided — 24 dB/oct, 18 dB/oct, and
12 dB/oct — each with its own distinct sound.
HPF ..............................High-pass filter
Frequencies lower than the cutoff frequency are cut off.
BPF..............................Band-pass filter
Frequencies around the center frequency are passed, while all
other frequencies are blocked.
BEF..............................Band-elimination filter
Frequencies around the center frequency are blocked, while
all other frequencies are passed.
4
ENV. DEPTH (Envelope Depth).................. [Knob 4]
Relative
[Settings] -64 ~ +63
Sets the depth of the filter envelope set via the FEG display
(Page 101). Negative settings invert the filter envelope.
