8. Changing the Sound of Voices (Voice Edit)
102 RS7000
3 FEG SUSTAIN (Filter Envelope Generator Sus-
tain).......................................................................... [Knob 3]
Relative
[Settings] -64 ~ +63
Determines the sustain level at which the filter envelope will
continue while a note is held, after the initial attack and
decay.
4
FEG RELEASE (Filter Envelope Generator
Release)..................................................................[Knob 4]
Relative
[Settings] -64 ~ +63
Determines how fast the filter envelope falls from the sustain
level to zero when a note is released. The lower the value the
faster the release.
■ PEG Page
1
PEG INIT LEVEL (Pitch Envelope Generator
Initial Level) ......................................................... [Knob 1]
Relative
[Settings] -64 ~ +63
Specifies the initial pitch of the note. Lower values produce
lower pitch.
2
PEG ATK (Pitch Envelope Generator Attack)
....................................................................................[Knob 2]
Relative
[Settings] -64 ~ +63
Determines the speed of attack from the initial pitch to the
normal pitch of the voice. The smaller the value the faster the
attack.
3
PEG DCY (Pitch Envelope Generator Decay)
........................................................................[F2] → [Knob 2]
Relative
[Settings] -64 ~ +63
Determines how fast the envelope falls from the normal pitch
of the voice to the sustain-level pitch. The smaller the value
the faster the decay.
Press [F2] to switch to this parameter.
4
PEG SUS (Pitch Envelope Generator Sustain)
................................................................................... [Knob 3]
Relative
[Settings] -64 ~ +63
Sets the sustain-level pitch which will be maintained while a
note is held.
5
PEG RLS (Pitch Envelope Generator Release)
........................................................................[F3] → [Knob 3]
Relative
[Settings] -64 ~ +63
Determines how fast the envelope falls from the sustain-level
pitch to the release-level pitch (below) when a note is
released. Press [F3] to switch to this parameter.
6
PEG RLS LEVEL (Pitch Envelope Generator
Release Level)................................................... [Knob 4]
Relative
[Settings] -64 ~ +63
Sets the final pitch reached after the note is released.
[PATTERN] → [VOICE EDIT] × 5
