93
Erase all
To erase all voice calling entries
1. In standby mode, press to display the main menu.
2. Press for
Voice Dial.
3. Press for
Erase All.
4. At the voice prompt and screen prompt, press to confirm that you
wish to
Erase All of the entries. A screen prompt will display when the
entries have been erased.
5. Press at any time to exit without removing any voice entries.
Set active
Voice dialing is always active once you have programmed the phone to accept
voice entries and associated the phone numbers. To place voice activated calls,
press and hold . Then say the name into the phone after you hear the
voice prompt and the beep.
Note: You can also initiate a voice call by opening the phone’s flip cover, when this
option is selected through the menu.
To change the Voice Dial activation options:
1. In standby mode, press to display the main menu.
2. Press for Voice Dial.
3. Press for
Set Active.
Two options display:
[*] Only and [*]/Flip.
4. Press to save the setting.
•
[*]: Represents the number.
•
[*] Only: Enables voice calling only by pressing and holding .
•
[*] /Flip: Enables voice calling either, by pressing and holding
or, by opening the phone’s flip cover.
