3
72
Shooting
6 Press E.
The control panel reappears.
7 Press F.
The camera returns to standby mode.
u Caution
• This function is not available when in R or S mode.
• The Digital Preview operation in Step 2 cannot be performed
when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
The outcome of Cross Processing varies each time a picture is
taken. If you take a cross processed image that you like, you
can save the Cross Processing settings used in the image so
that you can repeatedly use the same settings.
1 Press B in single image display of playback
mode.
The playback mode palette appears.
2 Select j and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select the “Favorite” number 1, 2 or 3 to save
the settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.71), and selecting one of the Favorite settings 1 to 3 for the
parameter.
Saving the Cross Processing Settings of a
Captured Image
100-0001100-0001
Saves this image's CrossSaves this image's Cross
Processing settingsProcessing settings
Save as Favorite 1Save as Favorite 1
Save as Favorite 2Save as Favorite 2
Save as Favorite 3Save as Favorite 3
CancelCancel OKOK
