6
103
Settings
Camera settings can be saved to O and P of the mode dial
and used repeatedly.
The following settings can be saved.
1 Set the exposure mode and all of the settings to
save.
2 Select [Save USER Mode] in A4 menu and
press D.
The [Save USER Mode] screen appears.
3 Select [Save Settings] and
press D.
The [Save Settings] screen
appears.
4 Select [USER1] or [USER2] and press D.
5 Select [Save] and press E.
The screen of Step 3 reappears.
u Caution
• [Save USER Mode] cannot be selected when the mode dial
is set to R, S, or Y.
t Memo
•
The settings saved as the USER mode can be displayed on
the monitor when you select [Check Saved Settings] in Step 3.
• To reset the settings to the default values, select [Reset
USER Mode] in Step 3.
You can change the name of the USER mode in which you
saved settings.
1 Select [Rename USER Mode] in Step 3 of
“Saving the Settings” (p.103) and press D.
The [Rename USER Mode] screen appears.
2 Select [USER1] or [USER2] and press D.
The text-entry screen appears.
3 Change the text.
Up to 18 single-byte
alphanumeric characters and
symbols can be entered.
Saving Frequently Used Settings
A4
Exposure Mode (G/H/
I/J/K/L/M)
Sensitivity
EV Compensation
AF point
Flash Mode
Drive Mode
White Balance
A1-4 menu settings
(with exceptions)
E1-4 menu settings
Saving the Settings
Save USER ModeSave USER Mode
Rename USER ModeRename USER Mode
Check Saved SettingsCheck Saved Settings
Reset USER ModeReset USER Mode
Save SettingsSave Settings
Editing a Setting Name
AABBCC
AABBCC
DDEEFF GGHH II JJ KKLLMMNNOOPPQQRR
SS TTUUVVWWXX YY ZZ 00 1122 33 4455 66 7788 99
.. ,, (( )) [[ ]] <<>>@@
++ ==$$%% ‘‘ ““ {{}}
-- __// :: ;; !! ??
**
##
Rename USER ModeRename USER Mode
CancelCancel
Delete One CharacterDelete One Character
EnterEnter
FinishFinish
Text selection cursor
Text input cursor
