3
48
Shooting
t Memo
•
The settings for exposure can be specified in increments of
1/3 EV steps. In [1 EV Steps] of the
E
1 menu, you can
change the adjustment steps to 1/2 EV steps.
• The correct exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is set
to a certain sensitivity.
•In L mode, the difference from the correct exposure is
displayed on the EV bar scale while exposure is adjusted.
•In M mode, some functions are not available. (p.110)
• For each exposure mode, you can set the camera operation
for when Q or R is turned or M is pressed. Set in [E-
Dial Programming] of the A4 menu. (p.100)
• When shooting with a low shutter speed, you can reduce
image noise from the control panel or [Slow Shutter Speed
NR] of the A2 menu.
The compensation value can be set between -5 and +5 EV (-2
and +2 EV in C mode).
1 Press J, and then turn
R.
e and the compensation value
are displayed on the status
screen, Live View screen, and in
the viewfinder during adjustment.
Available operations
t Memo
• Bracketing shooting enables you to take pictures while
automatically changing exposure. (p.62)
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
On
Applies Noise Reduction when the shutter speed is
slower than 1 second.
Off
Does not apply Noise Reduction at any shutter
speed.
Checking the Depth of Field (Preview)
When [Optical Preview] or [Digital Preview] is assigned to
P in [RAW/Fx Button] of [Button Customization] in the
A4 menu, you can check the depth of field before taking
pictures. (p.100)
EV Compensation
J
Starts/ends adjusting the compensation value.
M
Resets the adjustment value to the default setting.
1/
250
1600
F
5.6
99999
