3
52
Shooting
You can select the desired Noise
Reduction setting when shooting with
a high ISO sensitivity in the control
panel or [High-ISO NR] of the A2
menu.
When [Custom] is selected, the noise
reduction level can be set according
to the ISO sensitivity value in the A2
menu.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
Set in the control panel or [AE
Metering] of the A1 menu.
t Memo
• In [5 Link AE and AF Point] of the E1 menu, the metering
point and the AF point can be linked.
Noise Reduction when Shooting with
a High ISO Sensitivity
v/A2
Auto
Applies Noise Reduction at optimally calculated
levels throughout ISO range.
Low/
Medium/
High
Applies Noise Reduction at constant chosen
level throughout ISO range.
Custom
Applies Noise Reduction at user-defined levels
for each ISO setting.
Off
Does not apply Noise Reduction at any shutter
speed.
High-ISO NRHigh-ISO NR
AutoAuto
CancelCancel OKOK
1
100
200
400
800
1600
3200
6400
ISO
ISO
ISO
ISO
ISO
ISO
ISO
High-ISO NR
Reset
AE Metering
v/A1
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit conditions, this mode automatically
adjusts exposure.
B
Center-
weighted
Meters the brightness with an emphasis on the
center of the sensor.
The sensitivity increases at the center and no
automatic adjustment is performed even in
backlit conditions.
C Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.
AE MeteringAE Metering
Multi-segmentMulti-segment
CancelCancel OKOK
